[ietf78-tech] Mechanical specs of PoE-switches?

[Chris Elliott]

So Jim informs me you did the Wash. Hilton before me...you win!

Of course that means I get to stay in the NOC in Maastricht and drink beer while you crawl around in dark holes...


--
Chris Elliott


On Jun 25, 2010, at 5:20 PM, Chris Elliott <chelliot at pobox.com> wrote:

> "Not cisco gear..."--meaning not cisco gear in the past or do you break out in hives if you touch cisco gear and won't be useful? :-)
> 
> We could have used you in the Washington Hilton! Who would have thought that above the domed ceiling of the ballroom would have been filthy--and secret service tape everywhere.
> 
> Chris.
> 
> --
> Chris Elliott
> 
> 
> On Jun 25, 2010, at 5:10 PM, Rob Nagy <rob at deepdivenetworking.com> wrote:
> 
>> For those who don't know me... Jim means my specialty is jamming gear in ceilings and crawl spaces, and other locations not designed for gear. Preferably with a drain pipe I have to shimmy across.   Not cisco gear...
>> 
>> Sent from my iPhone
>> 
>> On Jun 25, 2010, at 3:12 PM, Jim Martin <jim at daedelus.com> wrote:
>> 
>>> 	Also, Rob Nagy has already volunteered to do this install ... it's a bit of his specialty ;-)
>>> 
>>> 	- Jim
>>> 
>>> On Jun 25, 2010, at 12:10 PM, Chris Elliott wrote:
>>> 
>>>> Geert,
>>>> 
>>>> We'd be using the 3560-E PoE switches in this location. Here's the physical specs:
>>>> 
>>>> 3560E-48PD
>>>> 1.75 x 17.5 x 18.1"
>>>> 4.45 x 44.5 x 46.0 cm
>>>> 
>>>> 3560E-48PD
>>>> 19.2 lbs
>>>> 8.75 kg
>>>> 
>>>> From:
>>>> 
>>>> http://cisco.biz/en/US/prod/collateral/switches/ps5718/ps7078/product_data_sheet0900aecd805bac22.html
>>>> 
>>>> So they're 1 RU, but deep and a bit heavy. However, I think we can get them up there--we've had worse challenges, believe me! And the benefits are various:
>>>> 
>>>>  - No need for injectors
>>>>  - Known switch
>>>>  - Same as other switches in network
>>>>  - Our management is already set up
>>>> 
>>>> Let me know if you think it will be impossible or extremely difficult to transport these switches up there.
>>>> 
>>>> Thanks!
>>>> Chris.
>>>> 
>>>> --
>>>> Chris Elliott
>>>> 
>>>> 
>>>> On Jun 25, 2010, at 10:17 AM, Geert Jan de Groot <geertj at nsrc.org> wrote:
>>>> 
>>>>> 
>>>>> What's the specs (size, weight) of the PoE-switches that you plan to use
>>>>> for SER2? The access hole to that rack is really small and cramped,
>>>>> and I do wonder if we can use the existing HP4000 (for which we'll
>>>>> have full access, including mgmt) and loose power inserters
>>>>> instead of another PoE-switch that we'll need to lift to the ceiling.
>>>>> 
>>>>> There is plenty of space in the rack. The challenge will be to
>>>>> bring the equipment through the ceiling hole.
>>>>> 
>>>>> SER2 is *above* the door at picture
>>>>> http://psg.com/~geertj/ietf78/pics/expohal/tn/IMG_5590.JPG.html
>>>>> Open the door, find a small, cramped room, step in, bring down
>>>>> temp aluminium ladder, climb ladder, which is a bit of a challenge.
>>>>> 
>>>>> "bring old clothes".
>>>>> 
>>>>> SER1 and SER3 is not nearly as difficult.
>>>>> 
>>>>> GJ
>>>>> 
>>>>> _______________________________________________
>>>>> ietf78-tech mailing list
>>>>> ietf78-tech at daedelus.com
>>>>> http://www.daedelus.com/mailman/listinfo/ietf78-tech
>>>> _______________________________________________
>>>> ietf78-tech mailing list
>>>> ietf78-tech at daedelus.com
>>>> http://www.daedelus.com/mailman/listinfo/ietf78-tech
>>> 
>>> _______________________________________________
>>> ietf78-tech mailing list
>>> ietf78-tech at daedelus.com
>>> http://www.daedelus.com/mailman/listinfo/ietf78-tech
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.daedelus.com/pipermail/ietf78-tech/attachments/20100625/08371150/attachment.html