[ietf83-tech] Had lost both freeradius processes (.1x was affected)

[Morgan Sackett]

Interesting.  I've seen this before at a few other meetings, though
never IETF meetings.  In that case it was very intermittent, so I
thought it was probably a buggy client. I was never able to run a long
enough diagnostics to verify my suspicion. It may be the same case.
Do the servers at the meeting have enough disk space and I/O head room
for a 2-3 day packet capture?  If so, it may be worthwhile to start a
debug on the inbound DHCP traffic to see if you can find the back
packet.

Otherwise, write a watchdog script to kick that buggy junk when it hangs.

-Morgan



On Tue, Mar 27, 2012 at 12:15 AM, Bjoern A. Zeeb
<bzeeb-lists at lists.zabbadoz.net> wrote:
> Hi,
>
> I was sitting in 6man and couldn't get on .1x.  Being in with eduroam
> or ietf I checked the old freeradius on services-1/2 I had never
> touched and we had lost both of them over night it seems.
>
> I'll keep an eye on that and investigate in further details after the
> WG session.
>
> Affected SSIDs should only have been ietf.1x and ietf-1.1x.
>
> In case there were/are any complaints, things should be good now, as I
> confirmed with -a.1x quickly while writing the email.
>
>
> /bz
>
> --
> Bjoern A. Zeeb                                 You have to have visions!
>          Stop bit received. Insert coin for new address family.
> _______________________________________________
> ietf83-tech mailing list
> ietf83-tech at daedelus.com
> http://www.daedelus.com/mailman/listinfo/ietf83-tech