[ietf86-tech] sw-dhcpv6 is online

[Bjoern A. Zeeb]

Hi,

I had to update the firmware in the 3560 to be able to configure the
ipv6 dhcp pool for DNS there.

It's currently connected to sw-noc port Gi 0/2.   In case anything
goes wrong, shutdown that port or unplug the cable.

When Jim and COlin are going to the demarc today, sw-dhcpdv6 Gi0/1
should go into sw-core Gi1/0/4.


This will not give us dhcpdv6 on the guestrooms or the hotel wireless
but should on all our normal meeting networks.  I have configured the
VLAN 64 and 128 however.


In addition the base config has only changed in hsotname and enable
secret + adding the ipv6 stuff and all the VLAN interfaces for that
and an IPv6 default route.

In case the template configs need any other changes please do so,
otherwise I'll go test the other wifi networks and then close the
ticket.


Have a good night or good morning.

/bz

-- 
Bjoern A. Zeeb                                  Charles Haddon Spurgeon:
"Friendship is one of the sweetest joys of life.  Many might have failed
   beneath the bitterness of their trial  had they not found a friend."