[ietf86-tech] Two APs lost their A radios

[Chris Elliott]

That's interesting. I assume you've checked the power level, and it's
sufficient to run both radios--check the log messages. These APs should be
able to run both radios with 15.4 watts, but maybe something in the
negotiation didn't work.

If all looks good there, I'd suggest rebooting, then, if it's still not
working, reseating the A radio module.

Enjoy!
Chris.


On Fri, Mar 8, 2013 at 7:06 PM, Bill Fenner <fenner at fenron.com> wrote:

> ap3012 and ap3013 seem to have lost their A radios.  They even report
> themselves to be 1141s.
>
> They're both in the same room, so this is probably a noticeable loss in
> "a" coverage.
>
>   Bill
>
>
> _______________________________________________
> ietf86-tech mailing list
> ietf86-tech at daedelus.com
> http://www.daedelus.com/mailman/listinfo/ietf86-tech
>



-- 
Chris Elliott
chelliot at pobox.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.daedelus.com/pipermail/ietf86-tech/attachments/20130308/c4b390eb/attachment.html