[ietf86-tech] Two APs lost their A radios

[Chris Elliott]

On Fri, Mar 8, 2013 at 7:09 PM, Chris Elliott <chelliot at pobox.com> wrote:

> That's interesting. I assume you've checked the power level, and it's
> sufficient to run both radios--check the log messages. These APs should be
> able to run both radios with 15.4 watts, but maybe something in the
> negotiation didn't work.
>
> If all looks good there, I'd suggest rebooting, then, if it's still not
> working, reseating the A radio module.
>

Reseating will require opening them up. I'd recommend replacing the APs
instead.


> Enjoy!
> Chris.
>
>
> On Fri, Mar 8, 2013 at 7:06 PM, Bill Fenner <fenner at fenron.com> wrote:
>
>> ap3012 and ap3013 seem to have lost their A radios.  They even report
>> themselves to be 1141s.
>>
>> They're both in the same room, so this is probably a noticeable loss in
>> "a" coverage.
>>
>>   Bill
>>
>>
>> _______________________________________________
>> ietf86-tech mailing list
>> ietf86-tech at daedelus.com
>> http://www.daedelus.com/mailman/listinfo/ietf86-tech
>>
>
>
>
> --
> Chris Elliott
> chelliot at pobox.com
>



-- 
Chris Elliott
chelliot at pobox.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.daedelus.com/pipermail/ietf86-tech/attachments/20130308/01e3c062/attachment.html